Peel and Stick Seam Tape

What is Ames’® Peel & Stick Seam Tape™?

A Contouring, Self-Adhesive, High-Strength Seam Tape for Concrete, Metal, and many other surfaces. Our seam tape comes in three different sizes: PS250: 2″x 50′, PS450: 4″x 50′, PS650: 6″x 50′

Seam taping is an easy process and an important step in properly preparing your surface before applying Ames Coatings and Paints.

Why is it important? Hot and cold temperature changes will cause a roof, wall, or deck to expand and contract. Over time, cracks and leaks can develop. The purpose of seam taping is to provide reinforcement over areas prone to splitting, such as seams or joints, and create a “bridge” that ties the surfaces together so water cannot seep through. Seam tape is used around roof vents, on flashings, over cracks and gaps, along the seams on metal or RV roofs, and in many other applications. Watch video 

Where to Use:  

Seam Tape is used around roof vents, on flashings, over cracks and gaps, along the seams on metal or RV roofs and many other surfaces. It creates a “bridge” that ties the surfaces together so water cannot seep through.

Instructions and Specifications:

Tools:
Scissors or utility knife.

Estimated Coverage:
Seam Tape comes in three different widths depending on the project size: PS250: 2″ x 50′, PS450: 4″ x 50, PS650: 6″ x 50.

Preparation:
Clean the surface. Remove all loose paint, dirt, oil and greases leaving surface clean and completely dry. Always run a test patch first in an inconspicuous area to ensure that proper adhesion occurs and the product works to your satisfaction.

Can be used in Conjunction with:
Ames® Super Elasto-Barrier™, Ames® Blue Max, Ames® Iron Coat™, Ames® Super Primer™, Ames® Maximum Stretch™ and Ames® Snow Seal™.

Contact Ames Research

Ames Research Laboratories
1891 16th St. S.E.
Salem, Or 97302
USA
Toll-free Technical Support
Mon-Fri 7:30 AM – 5 PM PT
1-888-345-0809
arlstaff@amesresearch.com
Subscribe to our newsletter,
and get the latest product tips and updates.

Ames Newsletter signup